The floor system is manufactured from a fabricated box section that sits in a frame of 105mm above the existing floor level.
To reduce the possibility of falls off of the 100mm deck we have introduced bull nose aluminium extrusion all around the peripheral edge of the dance floor.
We have also introduced internal lighting strips that indicates the 'step' as you approach the dance floor from adjoining areas.
The projected colour that eminates from within the floor deck is normally a vivid static colour, chosen to contrast the existing floor covering. For visual recognition the colour chosen is normally either white, red or blue, hower the colour is infinetly variable as the LED strips are powered and controlled using the same technology as the dance floor.

For Health and Safety reasons we do NOT allow drinks and fluids onto the dance floor.
This is principly to remove any potential slipping hazard.

All mains power is located in the contol desk, typically 3 meters away from the leading edge of the dance floor. The R/G/B colour control system located inside of each panel is driven by 24V so that ALL risk of electric shock has been removed.